RISH Ducer M01
 
Features :
  Programmable for specific systems (1/3 phase,2/3/4 wire)
  Nominal current programmable from 1 to 6 A
  Nominal voltage programmable from 57V to 400 V (Phase-to-neutral), or 100V to 693 V (phase-to-phase)
  Programmable analog outputs (Current or Voltage)
  Digital outputs can be used for limit value monitoring or energy metering
  Programmable Bend Characteristics
  Programmable Response time
  Universal (AC,DC) power pack with very wide tolerance range or AC auxiliary supply.
  Configurable from a PC or RS 232 interface
     
  General- The following ancillary functions are available :
  Power system check
  Display of measurement values at a PC monitor
  Simulation of outputs
  Recording of data in excel file & more
  RS 485 communication
   
Analog Output 0
Digital Output 0
Interface RS 232 / RS 485
Measured Variables Current & Voltage, Active/Reactive & Apparent Power,Cosφ,Sinφ & Power Factor, Ampere Demand,Frequency, Energy
Systems Single Phase AC,3Phase 3 wire Balanced/Unbalanced load, 3 Phase 4 wire Balanced/Unbalanced load
INPUTS
Frequency
Nominal Voltage
Nominal Current
50 to 60 Hz, 16 ⅔ Hz
57V to 400V
1A to 6A
Continuous
Overload
Capacity
Current
Voltage
10A
480V single phase sys 813 V Three phase sys
OUTPUTS
Load Independent
DC Current
Load Independent
DC Voltage
1mA to 20 mA
1V to 10V
Accuracy:
DIN IEC 688
Frequency
Current/Voltage
Power&Power Factor
0.15%
0.2%
0.25%
Power
Supply
AC Voltage
DC/AC Voltage
100V,110V,230V,400V,500V or 693 V
24V to 60V or 85V to 230V
Response Time 1…2 times the measurement cycle
Measurement Cycle Approx. 0.25 sec to 0.5 sec for 50Hz
   
  - M42
  - M24
  - M40
  - M01
  - M20
  - Configuration Software MXX
  - I 11
  - I 12
  - E 15
  - E 1D
  - E 13
  - I 21
  - I 22
  - V 11
  - E 15
  - E 1D
  - E 13
  - V 21
  - V 22
  - F 11
  - F 12
  - P11- Active/Reactive
  - C11-Powe Factor/Phase Angle
  - C12- Phase angle difference