:: Rishabh Instruments ::

RISH Ducer : C12 - Phase angle difference

Features :

RISH Ducer C12 converts the phase angle difference of two synchronized supplies into an output signal that can serve several receiving instruments such as indicators, recorders, alarm units etc.

Measuring quantity	Phase Angle difference of two single phase balanced network
Measuring Principle	Time Division Multiplication
Nominal Input	Voltage : 10 to 660V
Std. Measuring Ranges	± 60 to ± 175° elec
Output Quantity	Load Independent DC Voltage or DC Current (Unipolar / Bipolar)
Output Range	Current: 0-1/ 0-5/0-10/0-20/4-20mA, -1....0...1 to-20...0...20mA (Bipolar) Voltage: 0 -10V/ -10....0 lOV(Bipolar) Option: Dual Output
Ripple	≤ 2% P-P
Output Burden	Current Output : Rext = 15V / I (full Scale) Voltage Output : Rext = Output Voltage/ 20mA,
Auxiliary Supply	AC 24V / 115V or 230V ± 15% DC 24V...90V or 90...240V - 15% / 33%
Own Consumption	< 0.1 VA per current path, Un*l mA per Voltage path
Response Time	< 300ms
Accuracy as per IEC 688	Class 0.5
High Insulation level	4 kv
Impulse withstand Voltage	1 kv, 1.2/50µsec, 0.5 Ws
Operating Temperature	-25 to 55°C

Programmable Multi - Transducers

	-	M42
	-	M24
	-	M40
	-	M01
	-	M20
	-	Configuration Software MXX

Current

	-	I 11
	-	I 12
	-	E 15
	-	E 1D
	-	E 13
	-	I 21
	-	I 22

Voltage

	-	V 11
	-	E 15
	-	E 1D
	-	E 13
	-	V 21
	-	V 22

Frequency

	-	F 11
	-	F 12

Power

P11- Active/Reactive

Power Factor

C11-Powe Factor/Phase Angle

Phase Angle

C12- Phase angle difference