:: Rishabh Instruments ::

RISH Ducer : P11- Active/Reactive

Features :

RISH Ducer P11 measures active / reactive power of a single phase/ three phase system with balanced or unbalanced load by TDM (Time Division Multiplexing) principle and converts it into proportionate load independent DC Current or DC Voltage. The design is having negligible effect of power factor variation and output is accurate at very low power

Measuring quantity	Active Power, Reactive Power
Measuring Principle	Time Division Multiplication
Nominal Input	Current: 1A or 5A Secondary (0.01 to 10A) Voltage: 110/, 110, 230, 240, 400, 500V(10 V - 660V)
Std. Measuring Ranges	_
Output Quantity	Load Independent DC Voltage or DC Current (Unipolar / Bipolar)
Output Range	Current: 0-1/ 0-5/0-10/0-20/4-20mA, -1....0...1 to-20...0...20mA (Bipolar) Voltage: 0 -10V/ -10....0 lOV(Bipolar) Option: Dual Output
Ripple	≤ 1% P-P
Output Burden	Current Output : Rext = 15V / I (full Scale) Voltage Output : Rext = Output Voltage/ 20mA,
Auxiliary Supply	AC 24V / 115V or 230V ± 15% DC 24V...90V or 90...240V - 15% / 33%
Own Consumption	< 0.1 VA per current path, Un*l mA per Voltage path
Response Time	< 300ms
Accuracy as per IEC 688	Class 0.5
High Insulation level	4 kv
Impulse withstand Voltage	1 kv, 1.2/50μsec, 0.5 Ws
Operating Temperature	-25 to 55° C

Programmable Multi - Transducers

	-	M42
	-	M24
	-	M40
	-	M01
	-	M20
	-	Configuration Software MXX

Current

	-	I 11
	-	I 12
	-	E 15
	-	E 1D
	-	E 13
	-	I 21
	-	I 22

Voltage

	-	V 11
	-	E 15
	-	E 1D
	-	E 13
	-	V 21
	-	V 22

Frequency

	-	F 11
	-	F 12

Power

P11- Active/Reactive

Power Factor

C11-Powe Factor/Phase Angle

Phase Angle

C12- Phase angle difference