Hot Spot 6 Relay   Application :   The Rishabh Hot Spot 6 is a temperature trip relay accepting up to six inputs from resistance temperature detector (RTD) elements. The temperature trip point, common to all six channels, is user adjustable. Output is in the form of voltage free contacts from a single pole changeover relay, with LED indication of normal (green) or tripped (red) condition. Additional red LEDs are fitted to show which of the inputs are exceeding the trip point.   • Protection Against   • Ineffective cooling   • Blocked ventilation   • Overloads   • Worn bearings   • Locked rotor         Specifications :   Input Up to six RTD sensors e.g. 100W platinum (Pt100) or 10W copper Ambient Temperature 0 to 60°C Adjustment Range 100°C (e.g. 50 to 150°C,100 to 200°C etc) User Adjustment Screwdriver adjustable, multi-turn potentiometer, access on front panel. Approximately 5°C per turn. Turn anti-clockwise to raise trip point. Operating Time <100ms Repeatability within 1°C Reset Automatic. Relay differential (pull-in to drop-out) 4°C nominal Auxiliary supply A.C. 50/60Hz , 110, 120, 220, 230, 240V +20% (specify) Burden 6 VA maximum Weight Approximately 1.4Kg Output Relay : Type Single Pole Changeover Rating A.C 240V,5A non-inductive   D.C View chart Operations 0.2 million at the above load Reset Automatic     - Protector Trip Relays   - A.C. Current Relay   - A.C. Voltage Relay with adjustable differential   - A.C. Voltage Relay with adjustable time delay   - Frequency Relay   - Combined Under / Over Voltage & Under / Over Frequency Relay   - Phase Sequence & Phase Failure Relay   - Phase Balance Relay   - Reverse Power (Current) Relay   - Synchro-Check Relay(Paralleling)   - D.C. Voltage Relay   - Thermistor Trip Relay   - Hot Spot 3 Relay   - Hot Spot 6 Relay   - Millivolt / Thermocouple Relay   - Transducer Trip   - Speed Sensing Trip Relay